M365Con 2027 – free online conference · 11–22 Jan 2027 · 120 sessions m365con.net

Blog · Mirko Peters

Power Automate and Workflows in Teams: How They Work (Beginner's Guide)

By ·

How the Workflows app in Microsoft Teams relates to Power Automate, how to create a workflow from a template or from scratch, how to manage it, and what the Office 365 Connectors retirement means for webhooks.

A workflow in Teams is an automated sequence that runs when something happens, such as a message being posted, and then does something, such as notifying a channel. The Workflows app in Teams is the entry point for building and managing them, and Microsoft's documentation shows these workflows run on Power Automate. If you can describe a routine task as "when this happens, do that", it is a candidate.

Key points

  • The Workflows app in Teams creates and manages automated workflows. Microsoft's documentation shows these flows are Power Automate flows and can also be managed in the Power Automate portal.
  • Create one from a template or from scratch. In both cases you set a trigger and an action, fill in the required fields and select Save.
  • Workflows built in the Workflows app are placed in the organization's default environment. The app must be enabled in the Teams admin center.
  • Office 365 Connectors in Teams stop working in the rollout from May 18 to May 22, 2026. Microsoft recommends Workflows, which run on Power Automate.
  • The pages read here do not describe licensing. Check Microsoft's licensing documentation before you rely on specific connectors.

Why teams use business workflow automation

Workflow automation means using software to run a repeatable business process, so people do not repeat the same manual steps by hand. An automation tool waits for a trigger and then runs the actions you defined, the same way every time. Microsoft Support describes the Workflows app as a way to set up automated workflows for routine tasks, which is the core of the idea: the work is repetitive and you can state the rule.

Typical examples of workflow automation in Teams, built only from what the documentation describes:

  • Notify a channel when a message is posted.
  • Run a flow on one specific message, using the For a selected message trigger.
  • Send alerts into a channel, which is the job incoming webhooks did before the Office 365 Connectors retirement.

Microsoft's pages read for this article do not give figures for time saved, so treat the benefit as fewer repetitive manual steps and a process that behaves consistently, not as a measured result.

Which workflow to automate first

A good first automation is frequent, rule-based and low risk. If you can write it as "when this happens, do that", and a mistake would be easy to spot, it is a good candidate. The safest first workflow notifies a channel. Tasks that need judgement, or touch data you cannot afford to get wrong, are better kept manual until you trust the process.

How Teams and Power Automate fit together

Power Automate is Microsoft's flow service. Microsoft Learn's page on creating flows from Teams refers to flows, the Power Automate designer and the portal at make.powerautomate.com, where flows created in Teams can also be managed. Microsoft Support describes See all in the Workflows app as showing workflows across Teams, SharePoint, Power Automate and Copilot. The pages read do not go further into how the services relate, so treat the Workflows app as a Teams front end for Power Automate flows.

Three terms help:

  • Trigger. The event that starts the workflow.
  • Action. What the workflow does after the trigger.
  • Connection. The sign-in a workflow uses to reach an app or service. Learn says you must sign in to all connectors for flows to run successfully.

Where to find the Workflows app

Microsoft Support lists several entry points:

  • View more apps on the left side of Teams, search for "Workflows" and select Add. You can pin the app to keep it easy to reach.
  • More options next to a chat or channel name, then Workflows.
  • More options next to a message, then More actions > Create new action.
  • Actions and apps next to the compose box, then Workflows.

If you do not see it, your organization may not have enabled it. Microsoft Learn says the Workflows app must be enabled in the Microsoft Teams admin center.

Create a workflow from a template

  1. Open the Workflows app.
  2. Pick a template from the home page carousel, or select All templates. You can also search by keyword.
  3. Follow the prompts and fill in the required fields. Learn describes setting up connections, where a green check indicates successful authentication.
  4. Select Save to activate the workflow.

Microsoft Learn also describes a slightly different template flow in which you name the flow, sign in to the connectors it uses, provide the required parameters and select Add workflow.

Create a workflow from a message

For a flow that acts on a specific message, select More actions > Create new action on that message, then choose a template that uses the For a selected message manual trigger and set up its connections.

Create a workflow from scratch

  1. In the Workflows app, select Build from scratch.
  2. Choose a trigger and an action. You can change them later.
  3. Complete the required fields and select Save.

Microsoft Learn also describes Create a flow in the Workflows app, which opens the full Power Automate designer inside Teams. The two pages describe slightly different wording for this step, which can reflect different versions of the app. Follow what you see in your tenant.

Manage your workflows

The home page shows your five most recent workflows under Your workflows. Select See all for the full list and use the search bar to filter. From More actions you can:

  • Edit and Save.
  • Turn on or Turn off.
  • Details, including adding a co-owner under Owners.
  • Delete, confirmed with a second Delete.

Adding a co-owner matters. A workflow that belongs to one person is a risk when that person leaves.

Known limits and admin notes

From Microsoft Learn:

  • Flows from the Workflows app go into the default environment.
  • Conditional Access needs care. If Teams and Power Automate token requirements differ for individually targeted apps, users may see authentication errors. Microsoft recommends targeting Office 365 or All cloud apps, and if you target individual apps, include Microsoft Flow Service with matching requirements.
  • Terms of Use policies can break existing connections.

Webhooks and the Office 365 Connectors retirement

If you send alerts into Teams with incoming webhooks, this matters. A Microsoft 365 developer blog post, with an update dated April 14, 2026, gives the final schedule:

  • Rollout begins May 18, 2026 and completes May 22, 2026.
  • After that, Office 365 Connectors stop working.
  • Webhooks must be moved to Power Automate based workflows before the rollout begins.
  • The recommended replacement is Workflows in Microsoft Teams.

Known limitations of Workflows webhooks as of that update: no bot icon or name customization, so messages appear under the default Workflows bot, and MessageCard payloads do not support HttpPost action buttons. Interactive cards need Adaptive Cards and a workflow that handles the response. Private channels are supported through the Power Automate portal, and Microsoft said selecting private channels in the Workflows app was rolling out fully by April 20, 2026.

Getting started safely

  1. Start with one template that notifies a channel. It teaches triggers, actions and connections with low risk.
  2. Check the workflow's Details and add a co-owner.
  3. Ask your admin whether the Workflows app is enabled and how Conditional Access is set.
  4. Do not assume a connector is free to use. The pages read do not describe licensing.

Related

Sources

FAQ

What is the Workflows app in Teams?

According to Microsoft Support, the Workflows app helps you set up, find and manage automated workflows for routine tasks. Microsoft Learn describes the flows created in it as Power Automate flows, which you can also manage at make.powerautomate.com.

What kinds of business tasks can teams automate with Workflows in Teams?

Microsoft Support describes the Workflows app as a way to automate routine tasks and offers templates for them. Examples in the documentation include acting on a selected message and sending alerts into a channel. The pages read do not list every template, so browse All templates in your own tenant.

How do I create a workflow in Teams?

Microsoft Support describes opening the Workflows app, choosing a template from the home page or All templates, following the prompts and selecting Save. To start without a template, select Build from scratch, choose a trigger and an action, complete the fields and select Save.

Where do my Teams workflows run?

Microsoft Learn says all flows created in the Workflows app are placed in your organization's default environment. The Workflows app also has to be enabled in the Microsoft Teams admin center.

What happened to Office 365 Connectors in Teams?

According to a Microsoft 365 developer blog post updated April 14, 2026, the rollout that stops Office 365 Connectors begins May 18, 2026 and completes May 22, 2026. Webhooks must be moved to Power Automate based workflows before it begins.

Do I need a Power Automate license for Teams workflows?

The Microsoft Support and Learn pages read for this article do not discuss licensing and do not say which connectors are included. Check Microsoft's Power Automate licensing documentation or ask your admin before you build something that uses premium connectors.

Entities in this article

Topics of this article:

Power Automate – Low-code tool by Microsoft Microsoft Teams – Collaboration tool by Microsoft Power Platform – Low-code tool by Microsoft

Related articles

More articles on Power Automate:

RSS